Products

L2 Enterprise Managed Switch
28 Port Fiber Gigabit with 10G SFP+ Managed Switch

28 Port Fiber Gigabit with 10G SFP+ Managed Switch

ES220-28-24F

Features
  • 24 x Gigabit SFP, 4 x 10G SFP+
  • System : L3 IPv4/IPv6 static route, DHCP Auto configuration, SNMP, RMON(1,2,3,9 groups)
  • Network: Ethernet Ring Protection Switching (ERPS G.8032), 802.1Q VLAN, Multicast VLAN, MAC VLAN, Protocol VLAN, Private/Voice VLAN, GVRP, IGMP Snnoping, MLD Snooping, DDM, LLDP (TLVs, Dot1 TLVs, Dot3 TLVs, MED Port Settings, LLDP Statistics, LLDP Local Port Brief, LLDP Neighbors Information)
  • QoS: CoS, Port Priority, DSCP, Scheduling Algorithm, IPv6 Traffic Class
  • Security: Port Security, Port Access Control, Dial-in User, RADIUS, TACACS+, Destination MAC Filter, DoS, DHCP Snooping, Dynamic ARP Inspection, ACL
  • Tools: Dual Firmware images and Dual configuration file, SOARNEX network assistant utility (S-View), Quick Setup Wizard ( AP& Surveillance Mode)

View More Details
Features


24 Gigabit SFP fiber ports and 4* 10 Gigabit SFP Managed Switch
ES220-28-24F
ERPS helps achieve high reliability and network stability
Internet is becoming inseparable to our lives, and the presence of wireless connection is more important than ever. Stay connected is the fundamental goal, however, one can never arrange enough for the changes and unpredictable occurrences.
ES220-28-24F L2+ enterprise switch support Ethernet Ring Protection Switching (ERPS). The ring protection link (RPL) in the ring would ensures all switches stay connected and minimize the disruption to service; loop avoidance is assured as RPL blocks the traffic when not in used. Streaming and data transfer adopt the topological characteristics of the ring network. In the event of a network failure, ERPS quickly enables the backup link to be quickly recovered.
Layer 3 static route for SMB and data center
The ES220-28-24F L2+ enterprise managed switches which supports IPv4/IPv6 Layer 3 static route for SMB, data center access.
Cost-effective 10Gbps Uplink Capacity
The ES220-28-24F provides 24-Port Gigabit SFP, four 10 Gigabit SFP+ ports. With all available 24 Gigabit Port and industry design with bracket mounting kit, the ES220-28-24F give administer an easy way to deploy network environment. The feature of VLAN, QoS, and Spanning Tree can be configured via the intelligent software. Additional SFP port can meet longer distance requirement you need
Gigabit Fiber applies on the central side for Enterprise and Data Centers
To meet the backbone application of surveillance, enterprises, telecoms and campuses in a large-scale network deployment, SOARNEX SOAR series, ES220-28-24F, provides a cost-effective solution to connect network port you want in the network environment. It supports both IPv4 and IPv6 protocols and provides 24 Gigabit SFP Fiber Ports and 4* 10G SFP+ uplink slots.
Extendable Solution and Flexible manageability
Each built-in mini-GBIC slots in the EP/ES220 series have supported 1000Base-SX/LX SFP (Small Form-factor Pluggable) or 10G fiber-optic modules. An administrator can flexibly choose a suitable SFP transceiver according to the transmission distance required.
The Switch provides variety of management ports, such as console in support CLI (Command Line Interface), Web network management, Telnet and SNMP V1/V2c/V3, Switch management also can use SSL enhances security.
System
  • - L2+ (L3) features
    • IPv4 Static/Default Route
    • IPv6 Static/Default Route
    • ARP Aging Timeout
    • Static ARP
    • IPv4/IPv6 Interface Settings
    • IPv6 Neighbor Settings
    • IPv6 neighbor Discovery
    • - Support static/dynamic neighbor Address
  • - DNS Client Settings
  • - IP Access List
  • - Administration Setting
    • Support manual create administration account
  • - Timeout (Web Idle, CLI Idle timeout)
  • - System Time
    • Support manual configure System Time
    • Support SNTP sync time via IP or Domain
  • - Web (Web Status enabled/disable, port settings)
  • - SSL
  • - SSH
  • - Telnet
  • - DHCP Auto Configuration
  • - System Log setting
    • Support save log to remote log server (via IPv4/IPv6 Address)
  • - SNMP
    • SNMPv1/v2c/v3
  • - RMON
    • - RMONv1 MIB Standard (1, 2, 3, 9 groups)
  • - Statistics
    • Traffic/Error statistics information
  • - S-View trap Settings
  • - IEEE 802.3az EEE (Energy Efficient Ethernet)
    • The EEE only works for the switch with RJ-45 interface
Network
  • - Physical Interface
    • Auto MDI/MDI-X
    • Enable/Disable Interface per port
    • Auto/Manual set for Connection speed
    • Jumbo frame enable/disable per port
    • Flow Control enable/disable per port
    • EAP pass through enable/disable per port
    • BPDU pass through enable/disable per port
    • Port Description
  • - Spanning Tree Protocol
    • IEEE 802.1D Spanning Tree Protocol (STP)
    • IEEE 802.1W Rapid Spanning Tree Protocol (RSTP)
    • IEEE 802.1S Multiple Spanning Tree Protocol (MSTP)
  • - ERPS(G.8032)
  • - Trunk
    • Up to 8 Aggregation groups.
    • Support manual Aggregation (2~8 ports per group).
    • Dynamic Trunk: Link Aggregation Control Protocol (LACP), (2~10 ports per group)
  • - Mirroring
    • One to One/Many to One
    • Mirroring for Tx/Rx/Both
  • - Loopback Detection
  • - Static Unicast Address mapping
  • - Static Multicast Address mapping
  • - IGMP Snooping
    • IGMP Snooping (v1/v2/v3 awared in partial functions)
    • Max. 256 IGMP Group entries
    • Support IGMP Snooping Querier
    • Support Static/Dynamic Router Port per VLAN
  • - MLD Snooping
  • - Multicast VLAN
  • - Multicast Filtering
  • - Bandwidth Control
    • Destination Lookup Failure(DLF)/Broadcast/Multicast Storm Control
    • Ingress/Egress rate limiting
  • - IEEE 802.1Q VLAN
    • Max. 256 static VLAN groups
    • VLAN ID 1~4094
    • Private VLAN
  • - GVRP
  • - Voice VLAN
    • 10 maximum user defined OUI allowed
  • - LLDP
    • LLDP Global Settings
    • Basic TLVs Settings
    • Dot1 TLVs Settings
    • Dot3 TLVs Settings
    • MED Port Settings
    • LLDP Statistics Information
    • LLDP Local Port Brief
    • LLDP Neighbors Information
  • - DDM
    • Alarm/Warning Trap
    • DDM Interface configure
    • DDM Threshold Management
    • DDM Info Table
Quality of Service (QoS)
  • - Class of Service (CoS)
  • - Port priority
  • - Differentiated Services Code Point (DSCP) Priority
  • - Scheduling Algorithm support Strict or Weighted Round Robin (WRR)
  • - IPv6 Traffic Class
Security
  • - Port security (per port control learning MAC Address)
  • - Port Access Control
    • Guest VLAN feature
    • VLAN Assignment feature
  • - Dial-in User
  • - RADIUS
  • - TACACS+
  • - Destination MAC Filter
  • - Denial of Service
  • - DHCP Snooping
    • DHCP Snooping Global Settings (Pass Through Option82, DHCP Option 82 Insertion)
    • Trusted Interfaces Settings
    • Binding Database Settings (MAC, IP, VLAN, Port)
  • - Dynamic ARP Inspection
    • ARP Access List
    • ARP Inspection Settings
    • ARP Inspection Port Settings
    • ARP Inspection VLAN Settings
    • ARP Inspection Statistics
    • ARP Inspection Log
  • - Access Control List (ACL)
Tools
  • - Firmware Upgrade
    • Support dual firmware images
    • Support firmware upgrade via HTTP/TFTP
  • - Configure Backup/Restore, Save Settings
    • Support dual dual configuration files
    • Support configure file backup/restore via HTTP/TFTP
  • - Reboot
    • Normal, Factory Default, Factory Default expect IP Address
  • - Ping function
Management
  • - Web base GUI
  • - Command Line (CLI)
  • - Telnet
  • - SNMP (get/set)
  • - SNMP trap
  • - SSH
  • - SOARNEX network assistant utility (S-View)


?Firmware Version Different
Hardware Specifications
Interface 24 Ports 100/1000 Mbps SFP
4 Ports 1000/10000 Mbps SFP+
Console Port RJ45
Port Standards & Functions IEEE 802.3u 100Base-TX Ethernet
IEEE 802.3ab 1000Base-T Gigabite Ethernet
IEEE 802.3z 1000BASE-X
IEEE 802.3x Flow Control
IEEE 802.3ae 10G fiber optic
Full/Half Duplex Full duplex for Gigabit speed
Media Interface Exchange Auto MDI/MDIX
Performance
Switching Capacity 128 Gbps
Transmission Method Store and forward
MAC Address Table 16K entries
Maximum 64 bytes packet forwarding rate 95.2Mpps
Data RAM Buffer 1.5MBytes
Jumbo Frames 9Kbytes (9216bytes)
Physical/Environmental
Power input AC 100-240V;50/60Hz; 2.0A
Maximum Power Consumption 33.4 Watts (without PoE)
Standby Power Consumption 16.7 Watts (without PoE)
Acoustics 49.7 dBA
Heat Dissipation(Full load w/ PoE) 114 Btu/hr
Operating Temperature -5 ~ 50? *(23 - 122?)
Storage Temperature -40 ~ 70? *(-40 - 158?)
Operating Humidity 10~90% non-condensing
Storage Humidity 5~90% non-condensing
Dimensions (WxDxH) 440 x 210 x 44 mm
(17.3 x 8.3 x 1.7 inches)
Weight 1.664 kg (58.7oz)
Certifications CE, FCC, CCC
LED Indicative Device: PWR, Console
Per ports: Link/Ack/Speed
ESD IEC/EN 61000-4-2, Level 3
Surge IEC/EN 61000-4-5, Level 3
Signal : ANSI/IEEE C62, 41 CategoryB, High exposure(6KV)
Ordering Information
ES220-28-24F 24-Ports Gigabit SFP ports Managed Switch + 4*10G Base-X SFP+ ports
SFP Modules
EF220-SF SFP Fiber Transceiver,1000BaseSX, LC connector, 550m
EF220-SF20 SFP Fiber Transceiver,1000BaseLX, LC connector, 20km
EF220-WA20 SFP Fiber Transceiver,1000BaseBX WDM, TX:1310nm/RX:1550nm, 20Km
EF220-WB20 SFP Fiber Transceiver,1000BaseBX WDM, TX:1550nm/RX:1310nm, 20Km
EF230-SF SFP+Fiber Transceiver;10Gbps;300m;850nm;MMF;LC
EF230-SF10 SFP+Fiber Transceiver;10Gbps;10km;1310nm;SMF;LC
EF230-WA20 SFP+ Fiber Transceiver;10Gbps,BIDI;20km;T1270/R1330nm;SMF;LC
EF230-WB20 SFP+ Fiber Transceiver;10Gbps,BIDI;20km;T1330/R1270nm;SMF;LC
EF230-DAC1 10G SFP+ Direct Attach Cable (DAC);Passive;30AWG;1m
EF230-DAC3 10G SFP+ Direct Attach Cable (DAC);Passive;30AWG;3m
Wireless Access Point
EWA-210 300Mbps 11N Ceiling Mount Wireless Access Point,
Gigabit LAN, 802.3af/at PoE PD
EWA-212 1200Mbps 11ac Dual Band Ceiling Mount Wireless Access Point,
Gigabit LAN, 802.3af/at PoE PD
EWA-217 1750Mbps 11ac Dual Band Ceiling Mount Wireless Access Point,
Gigabit LAN, 802.3af/at PoE PD
History
    3Inquiry
    Contact Us